2061-P3 STUD BOY Square Backer Plates

Review STUD BOY Square Backer Plates Aluminum 5/16 Inch 96-pack

The Stud Boy 2061-P3 Square Backer Plates are an essential addition to any construction or DIY project that requires the installation of drywall screws or anchors. This economical 16 gauge, zinc-plated steel product is available in a convenient 96-count pack, ensuring an ample supply for larger projects.

Each backer plate in this set measures 3 inches by 3 inches, making them suitable for a range of applications, including securing drywall to studs, brick, concrete, and other surfaces. Their square shape is ideal for situations where a standard round backer plate may not fit properly, adding versatility to their use.

The 16-gauge thickness of these backer plates guarantees both durability and excellent load-bearing capacity, ensuring that your installations remain secure and reliable. Given their zinc plating, they offer enhanced resistance to corrosion compared to uncoated plates, ensuring your investment stays strong even in the harshest environments.

The smooth, even surface of the backer plates allows for easy drywall taping and finishing, granting a professional, seamless finish to your projects. The 3/4 inch square hole in the center is perfectly sized to accommodate typical screw sizes (#8 or #10), and the seven corner holes grant ample support whenSecuring screws in various angles and directions.

The 96-count packaging of the Stud Boy 2061-P3 Square Backer Plates makes bulk purchasing more accessible for contractors, builders, and DIYers alike. With their efficiency, versatility, and high load-bearing capacity, these backer plates are an invaluable addition to any toolkit or construction site.

Pros and Cons of Buying Stud Boy 2061-P3 Square Backer Plates (16 - 96 pack)

Stud Boy 2061-P3 Square Backer Plates are widely used in construction projects for various applications including fireproofing, insulation, and as a base for drywall installation. This article aims to provide an objective evaluation of the benefits and drawbacks of purchasing a Stud Boy 2061-P3 Square Backer Plates in a 16 - 96 pack.

1. Versatility: These backer plates can be used for various construction projects, including tile and slate work, fiberglass insulation, and as base supports for drywall installations.

2. Fire-Resistant: The Stud Boy 2061-P3 plates are designed with gypsum, which is naturally fire resistant, making them a popular choice for walls in fire-prone areas to increase safety standards.

3. Economical: Buying in bulk, such as a 16-96 pack, can save you money in the long run, especially for larger projects or frequent DIY projects.

4. Easy Installation: These backer plates require no special fasteners, making the installation process easier and quicker than traditional methods.

5. Consistency: The uniformity of the 16-inch by 9.6-inch size and the perforations on the plates ensure a hassle-free installation.

1. Weight: The Stud Boy 2061-P3 plates are denser and heavier compared to traditional drywall plates due to their gypsum composition. This may require additional labor and lifting equipment.

2. Fragility: Despite their durability, these backer plates are susceptible to fragile edges and may break easily if mistreated during handling or installation.

3. Limited sizes: Stud Boy 2061-P3 plates come in only one standard size of 16 inches by 9.6 inches, making it non-ideal for projects requiring different sizes.

4. Absorption: The gypsum material can absorb moisture, causing potential crystallization, which may weaken the strength of the plates. Ensuring proper waterproofing is crucial for these backer plates.

The Stud Boy 2061-P3 Square Backer Plates offer numerous advantages, including fire resistance, versatility, and ease of installation. However, their weight, potential fragility, limited sizes, and moisture absorption are considerations that may affect the decision to purchase them. If your project requirements align with the benefits mentioned above and you can accommodate for their drawbacks, then buying a 16 - 96 pack of Stud Boy 2061-P3 Square Backer Plates may be a cost-effective and wise investment.

1. Use them where their benefits are most optimal, such as fire-sensitive areas or walls supporting heavy tiles.

2. Handle them with care to avoid breaking during installation and storage.

3. Ensure proper waterproofing techniques are used during installation.

4. If you frequently work on projects requiring various plate sizes, consider purchasing a diverse collection or using an alternative backer plate material.

Details:

Domed-plate profile gives greater effective Stud height and strength. 090 thick high-strength, heat-treated steel. Stud Boy square backer plates aluminum 5/16 96-pack: 1.125 size for superior support. Two sizes to cover all applications: 7mm and 5/16 use for 1/4 -20 Studs.

125 thick aluminum for strength and durability.

specifications snowskirunn:

• brand: Stud Boy
• mpn: 2061-p3
• part type: Aluminum Backer Plate
• warranty details: See Manufacturer

payments snowskirunn:

• wallet: google-pay
• other
• credit card: mastercard

seller snowskirunn:

• rating: 99.2%
• city: grand rapids, michigan
• # reviews: 597775

offer snowskirunn:

• options: ship-to-home
• started: november 27, 2024
• in stock #: 4
• sold #: 25
• prices: $49.99–$74.00
• item condition: New
• availability: in stock

shipping snowskirunn:

• type: fixed
• service: ups ground
• transit: 3-6 days
• carrier: ups
• class: standard

returns snowskirunn:

• time: 30 days
• paid by: buyer
• policy: returns accepted

general snowskirunn:

• category: Snowmobile Parts > Skis Runners